Stability Chambers

Stability Chambers

REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.

LCD Display

  • 4 Inch attractive LCD display
  • Intelligent Controller helps maintain temperature in case of sensor failure
  • Battery Backup for Temperature Controller
  • Auto tuning of controller
  • Self-Diagnosis for errors
  • Histogram format of 24 hours temperature recording
  • Settable High / low alarm points
  • Memory for storage of upto 1000 records
  • Centronic interface to record Temperature, Date, & Time by attaching Dot Matrix printer with adjustable print interval
  • Alarm on equipment / output for remote alarm

Touch Screen Display

  • 7 inch big colour touch screen
  • PLC (Programable logic controller)
  • Memory of 1500 records
  • Centronic interface to record Temperature, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • Ethernet port
  • Battery backup in case of power failure for display, alarms & off-line data logging (optional)
  • Programmable cyclic timer for controlling illumination conditions
  • Remi “Datasoft” Data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (optional)

REMI ‘Data Soft’

  • Multiple level alpha numerical password with password ageing
  • Secured audit trail report
  • Alarm report with mention of alarm condition
  • Mean Kinetic Temperature able to be calculated for any days & alarm deviation report
  • Reports in graphical and tabular form
  • Data Stored in PC server with Lan connectivity and can be monitored on PC with password authentication
  • Multi chamber data acquisition on single software
  • Communication through RS 485 / TCP IP
  • GSM Mobile Alert for six Numbers
  • Power failure and resumption recorded with date and time

Optional Accessories

To be Ordered Separately
  • Data logger for 8/16 Point temperature & Humidity recording with sensor
    printer interface and software (Optional)
  • Software as per 21 CFR Part 11 requirements
  • PLC Based Control System with HMI Touch Screen
  • Biometrics Magnetic Door Access for Secured Door opening with software to maintain log
  • Validation (mapping) consist of one cycle for temperature at any one set point for 24 hours on empty and loaded condition
  • Standby Refrigeration System
  • Standby Humidity System
  • GSM alert through SIM card
Technical Data
SC-6 Plus SC-10 Plus SC-12 Plus SC-16 Plus SC-19 Plus SC-28 Plus SC-35 Plus
internal Volume (Liters) 200 280 370 450 540 800 1000
Number of tray 2 3 4 5 6 6 7
Internal Dimensions W x D x H (mm) 660 x 655 x 450 660 x 655 x 650 660 x 655 x 850 660 x 655 x 1050 660 x 655 x 1250 800 x 800 x 1250 800 x 800 x 1580
External Dimensions W x D x H (mm) 800 x 1095 x 1020 800 x 1095 x 1220 800 x 1095 x 1420 800 x 1095 x 1620 800 x 1095 x 1820 960 x 1370 x 1950 960 x 1370 x 2270
Temperature Range & Accuracy 10°C to 60°C, ± 1°C
Humidity Range (Rh) & Accuracy 40% to 95%, ± 3%
Temperature & Humidity control Microprocessor with Capacitance type sensor
Display 4″ LCD Screen, Large size Display for ease of reading
Power Failure Alarm Visual Alarm
Door Open Alarm Audio Visual Alarm in case door open for over one minute
Humidity/Temperature Variation Alarm Set Humidity ± 3% Rh, Set Temperature ± 1°C, Audio Visual Alarm
Illumination 8 Watts Fluorescent Tube
Internal Body Material Stainless Steel – 316 grade
External Body Materia Stainless Steel – 304 grade
Insulation 80 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam
Noise Level Less Than 65 db(A)
Recommended Voltage Stabilizer VS-04 VS-07 VS-07

Supply: 220-240 Volts, 50 Hz Single Phase.