"Lab in your pocket." Compact, waterproof, pen-type pocket testers from HORIBA that measure directly on a sample — as little as a few drops — with no container required. Now available across 13 vibrant, easy-to-use models covering 10 water quality parameters, backed by a 2-year warranty and made in Japan.



LAQUAtwin pocket meters use the same measurement principles as HORIBA's laboratory instruments, miniaturized into an ultra-thin flat sensor (less than 1 mm thick) backed by over 70 years of HORIBA sensor expertise. Meters measure directly — no container required — with as little as 50 µL of sample using a sampling sheet, and offer seven flexible measurement techniques (immersion, drops, scoop, wipe, and testing of solids, powders, and paper/textiles/films). Calibrate and measure at the touch of a button, confirmed by a smiley-face stability indicator on the backlit LCD. Rated IP67 dust/waterproof, with a replaceable sensor and a compact carrying case for on-site testing.
Soil pH, nutrient availability, salinity, and nitrate measurement for fertigation management, plant sap analysis, and crop-specific nutrient monitoring.
Aquarium and pond water testing, salinity monitoring, and general water quality checks in the field or lab.
pH of brine, meat, sushi rice, pickled produce, and fermented sausage; sodium content in canned foods, milk, and beverages.
Sodium in athlete's sweat, calcium in milk, and other electrolyte/nutrient monitoring applications.
Residual sodium checks during clean-in-place (CIP) processes, potassium in seawater, and pH of cement/concrete for flooring installation.
pH and conductivity testing of acrylic paint films and paper supports for formulating aqueous cleaning solutions.
| pH | pH-11 (0.1 pH), pH-22 (0.01 pH), pH-33 (0.01 pH + Temp) — glass electrode, ± 0.1 to ± 0.01 pH accuracy, up to 5 calibration points |
|---|---|
| ORP | ORP-11 — platinum disk sensor, -1000 to 1000 mV, ± 2 mV accuracy, 1-point calibration |
| Conductivity / TDS / Salinity | 4EC-11, 4EC-22, 4EC-33, 4ECSalt-11 — 4-electrode sensor, 0 to 199.9 mS/cm range, TDS & salinity curves (NaCl/Seawater) |
| Ion Meters | NO3-11 (Nitrate), Na-11 (Sodium), K-11 (Potassium), Ca-11 (Calcium), F-11 (Fluoride) — ion selective electrodes, up to 2 calibration points |
| Sensor | Ultra-thin flat sensor, ABS epoxy body, replaceable |
| Display | Custom (Monochrome) Digital LCD with backlight |
| Operating Conditions | 5 to 40 °C / 85% RH or less (no condensation) |
| Battery | 2 x CR2032 (not included); approx. 400 hrs continuous use without backlight |
| Dimensions / Mass | 164 x 29 x 20 mm (excluding projections); approx. 45–50g excluding batteries |
| Waterproof Rating | IP67 (meter & sensor) |
pH range 0–14, resolution 0.1/0.01/0.01 pH; pH-33 adds temperature display. Includes pH 7.00 & 4.01 buffers, dropper, storage case.
-1000 to 1000 mV range, ± 2 mV accuracy. Includes 225 mV ORP standard, abrasive cotton swab, sampling sheet B.
Conductivity, TDS and salinity models with automatic range and standard recognition. Includes conductivity/NaCl standard solutions.
Nitrate, Sodium, Potassium, Calcium and Fluoride ion-selective models. Includes 150 & 2000 ppm standard solutions and dropper.
Individual replacement sensors for every model (pH, ORP, Salt, Sodium, Potassium, Nitrate, Calcium, Conductivity, Fluoride).
pH buffers (4.01/6.86/7.00), conductivity & NaCl standards, and ion standard solutions (Na, K, Ca, NO3, F) in 6 x 14ml packs.
For minute samples (≥ 0.05ml) and particulate samples — extends measurement down to trace volumes.
Conditioning solution for EC/Salt models; TISAB solution and ionic strength adjustors for ion-selective electrodes.